Blog

Special Offer: Used Welding Rotators

12 February, 19 4:22 pm · Leave a comment · reddarc
Share
Facebooktwitterlinkedinmail

used welding rotator set 500 Tonnes

We are currently offering 2 sets of completely refurbished welding rotators (500 Tonne).

  • Carrying Capacity 500T
  • 2 Complete Systems Available
  • Delivery Time 10/12 Weeks
  • 3 Month Warranty Included

500T-SET-GA-Refurbished-Welding-Rotator-Set-2.pdf

Pricing:

£ 51,350.00
€ 58,750.00
$ 65,750.00

Contact your local Red-D-Arc branch for more information.

Welding Equipment Assists With Offshore Wind Farm Projects

17 November, 17 8:26 pm · Leave a comment · Taylor Stewart
Share
Facebooktwitterlinkedinmail

image-814

A Red-D-Arc customer based out of the UK was awarded three large offshore wind farm projects …all commencing simultaneously. This manufacturer was comfortable taking on so many large scale, specialized projects because they have a reliable, knowledgeable, tier 1 supplier capable of meeting all of their welding and weld automation equipment needs! Red-D-Arc was able to quickly accommodate all of the welding equipment requirements for the project, providing more than 150 welders and a variety of weld automation equipment. The equipment consisted of multi-operator welding paks, diesel welders, advanced power sources, wire feeders, submerged arc welding packages, and rotators.

Two Red-D-Arc technicians were assigned to the facility to install, service and maintain the equipment to minimize downtime. The facility allocated a permanent workshop and storage container for back-up equipment which could be used to quickly replace any equipment as necessary. With Red-D-Arc’s support, the customer was able to work on all three projects simultaneously and avoid lost time due to equipment breakdowns.

Tank Manufacturing Made Easy with Weld Automation Equipment

07 November, 17 3:49 pm · Leave a comment · Taylor Stewart
Share
Facebooktwitterlinkedinmail

SPT IMAGE 2~2

An oilfield equipment and vessel manufacturer in the United Arab Emirates approached Red-D-Arc for assistance with a large project. It was awarded to them at the last minute and was not their primary area of expertise. The requirement was to manufacture 25 large tanks with a timeframe of only one year. Each of the tanks was to be 5 meters in diameter by 25 meters long, manufactured using 16 millimeter thick material at a weight of approximately 45 tonnes.

The experienced Red-D-Arc Weld Automation team was able to immediately address all of the customer’s challenges. While other suppliers where insistent that the customer purchase the equipment, Red-D-Arc determined that long term rental would be their best option. This would avoid the time consuming process of acquiring CAPEX approval to purchase such a large amount of equipment and would further increase the profitability of the project. The manufacturer also had questions on how to avoid ovality and transverse movement of the sub-assemblies. Red-D-Arc experts were on-hand to provide the right advice and the right equipment to address these challenges.

The rental equipment included:
• 6x 10 tonne rotator sets
• 10x 60 tonne drive rolls
• 47x 30 tonne and 60 tonne idler rolls
• 7x submerged arc packages with LT7 tractors and D600 power sources
Red-D-Arc worked very closely with the company to ensure their success, providing comprehensive training and on-site assistance. After the successful completion of this project the company has become recognized in their market and are receiving new orders from similar customers in the industry. Furthermore, they anticipate being awarded “phase 2” of this project which is scheduled to begin in 2018.

Red-D-Arc Turnkey Packages Support the World’s Largest Offshore Wind Farm

23 October, 17 5:42 pm · Leave a comment · Taylor Stewart
Share
Facebooktwitterlinkedinmail

Red-D-Arc recently supplied a variety of equipment to a UAE based company that is fabricating pile piping and jackets for the largest offshore wind farm project in the world. The company had to meet a strict time line of only 6 months, and would require a massive amount of welding and weld automation equipment immediately. Through consultation with Red-D-Arc, the customer determined that renting the majority of the equipment would be the most economical option. Red-D-Arc was able to fulfil the customers equipment needs immediately thanks to our vast and diverse fleet of equipment.

This massive order involved equipment and support from Red-D-Arc North America, Red-D-Arc UK and Red-D-Arc Middle East. The order consisted of a variety of welding and weld automation equipment including:
• 23 column and booms with single and tandem submerged arc welders
• 20 submerged arc tractors
• 200 rotators
• 167 jack-up rotators
• 400 CC/CV inverter welders
• 200 FCAW wirefeeders
• 10 Induction Heating Systems

By renting the majority of the equipment the fabrication company avoided the need to invest heavily in specialized equipment and ensured they would meet their deadline. Red-D-Arc works with customers to address their unique challenges and develops specialized solutions. Learn more about customized turnkey packages here.

Extending the Legs of a Large Seabound Work Platform

20 June, 16 6:36 pm · Leave a comment · Colin Brown
Share
Facebooktwitterlinkedinmail

A Red-D-Arc customer shared some interesting photos which document the process of extending the legs of a large seabound work platform and also feature several Red-D-Arc rotators. The platform is used for cleanup activities on the seabed and in order to work at greater depths; the legs of the work platform needed to be extended. The massive cylindrical legs were placed on Red-D-Arc rotators and rotated while the cutting and welding processes were carried out. Once the extensions were completed the legs were then returned to the platform.

Turnkey Weld Automation Packages

14 April, 16 2:42 am · Leave a comment ·
Share
Facebooktwitterlinkedinmail

Red-D-Arc designs and builds complete turnkey weld automation packages for your complete project requirements. Our team of engineers and designers develop specialized solutions alongside our customers. We’ll provide you with weld process recommendations and set up all your equipment for optimized reliability, functionality and productivity.

The Red-D-Arc Weld Automation team has extensive industry experience which includes hundreds of special and turnkey installations provided to diverse sectors of industry such as Oil Exploration and Refining, Nuclear Industries, Aerospace, Defense, Steel Mills, Mining and Wind Tower Manufacture. From small positioners for integration with welding robots to 500 tonne capacity positioners with unique HMI controls complete with onsite training, services and support.

AirGas Logo

Airgas, an Air Liquide company, is the nation's leading single-source supplier of gases, welding and safety products. Known locally nationwide, our distribution network serves more than one million customers of all sizes with a broad offering of top-quality products and unmatched expertise.